Miscellaneous Probes

Spring Loaded Probes

Spring loaded probes are excellent for situations where constant tip-to-surface angle and pressure is required. These probes are typically used for part sampling and corrosion detection.

Bridge (Differential)

To view additional table columns, slide right side of table to the left.

Spring Loaded Bridge Probe

Diameter Frequency 2-Pin Microdot Triax
.125″ 100-500KHz SPD.125-100K-2M SPD.125-100K
.125″ 500KHz-1MHz SPD.125-500K-2M SPD.125-500K
.250″ 10-20KHz SPD.25-10K-2M SPD.25-10K
.250″ 20-100KHz SPD.25-20K-2M SPD.25-20K
.375″ 500Hz-1KHz SPD.375-500H-2M SPD.375-500H
.375″ 1-5KHz SPD.375-1K-2M SPD.375-1K
.375″ 5-10KHz SPD.375-5K-2M SPD.375-5K
.375″ 10-50KHz SPD.375-10K-2M SPD.375-10K

Reflection

Spring Loaded Reflection Probe

To view additional table columns, slide right side of table to the left.

Diameter Frequency 2-Pin Microdot Triax
.250″ 20-100KHz SPR.25-20K-2M SPR.25-20K
.250″ 100-500KHz SPR.25-100K-2M SPR.25-100K
.375″ 500Hz-1KHz SPR.375-500H-2M SPR.375-500H
.375″ 1-5KHz SPR.375-1K-2M SPR.375-1K
.375″ 5-10KHz SPR.375-5K-2M SPR.375-5K

Blade Probes

Specialized surface probe originally used for access to clevis lugs and adjacent structures, but is excellent for any narrow gap or other areas that are difficult to reach.

Blade Probe

Angle Thickness 50-500KHz Microdot 50-500KHz Triax
Straight .045″ BL045-6 TBL045-6
Straight .060″ BL060-6 TBL060-6
Straight .090″ BL090-6 TBL090-6
30° .060″ BL360-6 TBL360-6
30° .090″ BL390-6 TBL390-6
45° .045″ BL445-6 TBL445-6
45° .060″ BL460-6 TBL460-6
45° .090″ BL490-6 TBL490-6
60° .045″ BL645-6 TBL645-6
60° .060″ BL660-6 TBL660-6
90° .045″ BL945-6 TBL945-6
90° .060″ BL960-6 TBL960-6

Wheel Probes and Standards

For wide scanning of bead seat area of aircraft wheels. Features include a close tolerance molding to wheel profile, thus eliminating effects of lift-off. Standard frequency is 500KHz. Probe coils are bridge/differential that run in reflection mode.

Wheel Probes and Standards

  PROBES STANDARDS KITS
Aircraft Main Nose Main Nose Part No.
B717 ACPM-717 ACPN-717 ACWM-717 ACWN-717 ACPK-717
B727 ACPM-727 ACPN-727 ACWM-727 ACWN-727 ACPK-727
B737 ACPM-737 ACPN-737 ACWM-737 ACWN-737 ACPK-737
B747 ACPM-747 ACPN-747 ACWM-747 ACWN-747 ACPK-747
B757 ACPM-757 ACPN-757 ACWM-757 ACWN-757 ACPK-757
B767 ACPM-767 ACPN-767 ACWM-767 ACWN-767 ACPK-767
B777 ACPM-777 ACPN-777 ACWM-777 ACWN-777 ACPK-777
DC-9 ACPM-DC9 ACPN-DC9 ACWM-DC9 ACWN-DC9 ACPK-DC9
DC-10 ACPM-DC10 ACPN-DC10 ACWM-DC10 ACWN-DC10 ACPK-DC10
MD-11 ACPM-MD11 ACPN-MD11 ACWM-MD11 ACWN-MD11 ACPK-MD11
MD-88 ACPM-MD88 ACPN-MD88 ACWM-MD88 ACWN-MD88 ACPK-MD88
KC-135 ACPM-KC135 ACPN-KC135 ACWM-KC135 ACWN-KC135 ACPK-KC135
C-130 ACPM-C130 ACPN-C130 ACWM-C130 ACWN-C130 ACPK-C130
F-15C,D ACPM-F15 ACPN-F15 ACWM-F15 ACWN-F15 ACPK-F15
F-15E ACPM-F15E ACPN-F15E ACWM-F15E ACWN-F15E ACPK-F15E
F-16 ACPM-F16 ACPN-F16 ACWM-F16 ACWN-F16 ACPK-F16
A-10 ACPM-A10 ACPN-A10 ACWM-A10 ACWN-A10 ACPK-A10

Defectometer Hole Probes

The hole and surface probes listed on this page are designed for the new Defectometer 2.837 but are backwards compatible to earlier versions including the 2.835. Defectometer probes are available in 2MHz only.

Defectometer Hole Probe

Diameter Unshielded Non-Ferrous Shielded Ferrous Unshielded
.085″ FHN.085 FHNS.085 FHF.085
.090″ FHN.090 FHNS.090 FHF.090
0.100″ FHN.100 FHNS.100 FHF.100
0.125″ FHN.125 FHNS.125 FHF.125
0.156″ FHN.156 FHNS.156 FHF.156
0.187″ FHN.187 FHNS.187 FHF.187
0.250″ FHN.250 FHNS.250 FHF.250
0.312″ FHN.312 FHNS.312 FHF.312
0.375″ FHN.375 FHNS.375 FHF.375
0.437″ FHN.437 FHNS.437 FHF.437
0.500″ FHN.500 FHNS.500 FHF.500
0.562″ FHN.562 FHNS.562 FHF.562
0.625″ FHN.625 FHNS.625 FHF.625
0.750″ FHN.750 FHNS.750 FHF.750
0.875″ FHN.875 FHNS.875 FHF.875
1.00″ FHN-1.0 FHNS-1.0 FHF-1.0

Defectometer Surface Probes

Defectometer Surface Probe

  NON-FERROUS UNSHIELDED NON-FERROUS SHIELDED FERROUS UNSHIELDED
Length Straight 90°w/.5″drop Straight 90°w/.5″drop Straight 90°w/.2″drop
3.0″ FPN-3 FPN95-3 FPNS-3 FPNS95-3 FPF-3 FPF92-3
4.0″ FPN-4 FPN95-4 FPNS-4 FPNS95-4 FPF-4 FPF92-4
5.0″ FPN-5 FPN95-5 FPNS-5 FPNS95-5 FPF-5 FPF92-5
6.0″ FPN-6 FPN95-6 FPNS-6 FPNS95-6 FPF-6 FPF92-6
7.0″ FPN-7 FPN95-7 FPNS-7 FPNS95-7 FPF-7 FPF92-7
8.0″ FPN-8 FPN95-8 FPNS-8 FPNS95-8 FPF-8 FPF92-8
9.0″ FPN-9 FPN95-9 FPNS-9 FPNS95-9 FPF-9 FPF92-9
10.0″ FPN-10 FPN95-10 FPNS-10 FPNS95-10 FPF-10 FPF92-10